|
|
Windchill collars are suitable for all breeds and are designed especially for stronger dogs and working breeds. Being made from synthetic webbing the collars are comfortable, durable and easy to wash, and have minimal wear on the dog's coat. Please note: Collars do not come standard with a buckle as any type of buckle will compromise the strength of the collar. If you wish to have a buckle collar please order it as an optional extra. Optional extras: Reflective tape, Plastic buckle, Embroidered Name-tag, Non-rust fittings
The Limited-Slip Collar incorporates a slip section has a limited amount of slip or tightening action so that the collar will tighten a few inches when your dog pulls, but without choking the dog. The Limited-Slip Collar is ideal as a gentler replacement for the correction (choker) chain in obedience training, for dogs that pull out of normal collars, for tethering, harness work and for everyday wear. These collars slip on over the head then are tightened until firm on the neck, so it is important that you choose a size that is big enough to slip on over your dogs head. As they have a large amount of adjustment, it is better to order a larger size if you are not sure. - 18 mm (3/4 inch ) webbing (top right) - 25 mm (1 inch) webbing (bottom right)
Materials Limited-Slip Collars are made with 1 inch synthetic webbing, double polyester stitching and heavy-duty nickel-plated metal rings & slides.
Red, Royal Blue, Light blue,
Purple, Pink, Dark Green, Emerald Green, Gold, Yellow, Burgundy, Brown,
Black. Grey. Sizes Top of page Limited-Slip Collars are available in 2 webbing widths:
25 mm (1 inch)
- suits medium & large dogs The collars have a large amount of adjustment and adjust to sizes approximately two thirds the maximum size. The collars are available in the following sizes or can be made to any size to suit your dog: Limited-slip collars - 25mm (1 inch) wide webbing
Please note - when selecting collar size please allow room for the collar to slip on over the dog's head (does not apply with buckle collars).
Limited-slip collars - 18mm (3/4 inch) wide webbing A lightweight collar which is strong but soft on the neck - excellent for smaller breeds, your puppy’s first collar, for lead training and for everyday wear. Made from 3/4 inch synthetic webbing & polyester thread with a combination of nickel-plated metal and PVC fittings.
Please note - when selecting collar size please allow room for the collar to slip on over the dog's head (does not apply with buckle collars).
The Standard Collar is similar to the limited-slip collar in construction but does not have the slip section. This collar is ideal for all breeds but particularly for strong dogs and are suitable for everyday wear. These collars slip on over the head then are tightened until firm on the neck, so it is important that you choose a size that is big enough to slip on over your dogs head. As they have a large amount of adjustment, it is better to order a larger size if you are not sure. Available in 2 widths: - 18 mm (3/4 inch ) webbing - 25 mm (1 inch) webbing NOTE: These collars do not come with a PVC Buckle unless ordered as an optional extra - See Below for details. PVC buckle collars are not recommended for any strong dog. Standard Collars are made with 1 inch synthetic webbing, double polyester stitching and heavy-duty nickel-plated metal rings & slides.
Red, Royal Blue, Light blue,
Purple, Pink, Dark Green, Emerald Green, Gold, Yellow, Burgundy, Brown,
Black. Grey. Sizes Top of page Standard Collars are available in 2 webbing widths:
25 mm (1 inch)
- suits medium & large dogs The collars have a large amount of adjustment and adjust to sizes approximately two thirds the maximum size. The collars are available in the following sizes or can be made to any size to suit your dog: Standard collars - 25mm (1 inch) wide webbing - Medium & Large Breeds
Please note - when selecting collar size please allow room for the collar to slip on over the dog's head (does not apply with buckle collars). Standard collars - 18mm (3/4 inch) wide webbing - Smaller breeds & Puppies A lightweight collar which is strong but soft on the neck - excellent for smaller breeds, your puppy’s first collar, for lead training and for everyday wear. Made from 3/4 inch synthetic webbing & polyester thread.
Please note - when selecting collar size please allow room for the collar to slip on over the dog's head (does not apply with buckle collars).
Plastic Buckle PVC side-release buckle for ease of putting on and removing the collar. (Note: PVC buckle not recommended for strong breeds such as the Alaskan Malamute & Siberian Husky).
Name is embroidered onto a section of black webbing - only available on 1 inch (25mm) wide collars. If colour is not specified we do the embroidery in the same colour as the main item on the black background (as pictured). If you would like a different colour lettering please provide details on the order form. Lettering for name-tags can be all uppercase (shown at right) or a combination of upper and lower case. Lettering height is approximately 3/4 the width of the webbing. Name tags are removable and can be added to most Windchill products.
Stainless Steel or Brass
Fittings |